What to do bending 1/2" plywood? - minimax boats photo
In building a small water plane and the main hull and the deck is bent plywood. The 1 / 4 "thick. Has a big curve on the front and exterior grade plywood, as to strength and screw at the bottom and add Imagen Ready Made is one of the http://www. Svensons.com / boat /? f = seaplane / Minimax / minimax_B.jpg
Thanks
Thursday, February 18, 2010
Minimax Boats Photo What To Do Bending 1/2" Plywood?
2 comments:
NO on wet wood, may Stean the boards with the right grain, and of course that is fresh water, use of salt water .. but it is completely different layers ... the great in the first curve can be formed from cold with the appropriate adhesive and fasteners.
can be reduced, but it kind of defeats the purpose of the half-inch layer of ...... is much greater if you use two or even better, three sheets of 1 / 8 "and add the cold layers in any shape formed on the floor and dried in the form of .. you get the picture .... Resin individual basis with famalderhide .. .. resorsinal Street
== Need outer sea, and yet are separated, when it's wet> 1 / 2 Please do not bend> I / 4 as slowly> turns takes time, tools> Remove the door glass mold skin then you have a solid shell> To the first place wax> to get the wood>
Post a Comment